Products

Organised by two technologies, LED and xenon. Choose the route first, then check the parameters and datasheet of each model.

LED Flash Lights

For inspection applications that need high brightness, high flash rates and short pulses. Externally triggered; the housing can be customised to the application.

4 models with datasheets

View LED Flash Lights

Xenon Flash Lights

For inspection applications that need high-energy flashes and high light output. Short pulses and external triggering; the housing can be customised to the equipment.

8 models with datasheets

View Xenon Flash Lights

Choosing between LED and xenon

Both are triggered by an external signal from the camera or controller; they differ mainly in the energy and timing of the flash.

TechnologyPrioritise when you needConfirm when selecting
LED flash lightsHigh flash rate, short pulse, longer service life and structural adaptation.Peak power / luminous flux, flash rate, trigger type, power supply, beam angle, mounting dimensions, environmental rating.
Xenon flash lightsEnergy per flash, short pulse, high brightness and imaging of fast-moving targets.Energy per flash, flash duration, recharge time, rate, trigger interface, power supply, mounting dimensions, environmental rating.
Falling-edge triggerTriggerExposureLED flashXenon flashActive lowFollows trigger pulse widthDuration set per modelTime →
Schematic only, not a measured waveform. An LED flash follows the width of the trigger pulse; a xenon flash has a duration determined by the model, on some models set via RS485 or a DIP switch.

All models

LED Flash Lights

ModelFlash energy / peak powerFlash duration / ratePower supplyIngress protectionDimensionsDatasheet
BT-LED500WS500 W peak · > 50,000 lm0–200 flashes/sDC 24 V ±10%IP65127 × 90 × 100 mmPDF · 135 KB
BT-LED1600WS1600 W peak · 100,000 lm (without lens)0–200 flashes/sDC 110 VIP65 / IP67139 × 108.4 × 95.4 mmPDF · 408 KB
BT-LED1600WS-B1600 W peak · 100,000 lm (without lens)0–200 flashes/sDC 110 VIP65 / IP67180 × 145 × 91 mmPDF · 412 KB
BT-LED1600WS-B220V1600 W peak · > 150,000 lm0–200 flashes/sAC 110–220 V, 50/60 HzIP65180 × 145 × 91 mmPDF · 161 KB

Values are taken from the datasheet of each model and apply to that model only, under the conditions stated in the datasheet.

Xenon Flash Lights

ModelFlash energy / peak powerFlash duration / ratePower supplyIngress protectionDimensionsDatasheet
BT-ZSD-300SXD75 J max.100–450 µs · up to 6 HzAC 110–240 VIP66255 × 182 × 160 mmPDF · 536 KB
BT-ZSD-350SXD75 J max.100–450 µs · up to 5 HzAC 110–240 VIP66270 × 156 × 130 mmPDF · 379 KB
BT-ZSD-200KF72 J max.80–450 µs · recharge ≥ 20 msAC 100–265 VIP66255 × 182 × 160 mmPDF · 461 KB
BT-ZSD-200KFD75 J100–450 µs · recharge 20 ms110–275 VIP67255 × 182 × 160 mmOn request
BT-ZSD-200KFL75 J50–450 µs · recharge 100 msAC/DC 110–220 VNot stated230 × 100 × 114 mmPDF · 501 KB
BT-ZSD-202KX30 J max.70–200 µs · recharge ≥ 20 msAC 100–265 VIP65300 × 200 × 200 mmPDF · 178 KB
BT-ZSD-160KX30 J max.70–200 µs · recharge ≥ 20 msAC 100–265 VIP65180 × 126 × 120 mmPDF · 610 KB
DZ100FL40 J max.80–250 µs · recharge ≥ 20 msAC 100–265 VIP65Not statedPDF · 178 KB

Values are taken from the datasheet of each model and apply to that model only, under the conditions stated in the datasheet.

No exact match?

Start from a similar model, or send us your equipment details to discuss customisation.

CallDiscuss Your Project