Applications

How the light source works with the inspection task. Rail transit inspection comes first; industrial production lines and road inspection extend it.

Rail transit inspection · Primary focus

Matching flash timing to high-speed inspection images

For high-speed image capture on high-speed rail and metro inspection equipment, we supply both LED and xenon flash lights. The products are externally triggered and are selected with you around target speed, camera exposure, flash duration, mounting position and protection requirements.

What we confirm together

  • Target speed and camera exposure——These determine how short the flash needs to be.
  • Triggering and synchronisation——Contact-closure or low-level trigger, and how the flash sits within the exposure window.
  • Mounting position and structure——Space inside the equipment, bracket type and cable exit.
  • Protection and environment——Operating temperature, humidity and ingress protection.
Discuss a rail inspection project
Falling-edge triggerTriggerExposureLED flashXenon flashActive lowFollows trigger pulse widthDuration set per modelTime →
Schematic only, not a measured waveform. An LED flash follows the width of the trigger pulse; a xenon flash has a duration determined by the model, on some models set via RS485 or a DIP switch.

Industrial production lines

Flash lighting that fits production-line inspection conditions

For production-line inspection at industrial sites such as steel mills, the light source is configured around camera triggering, inspection cadence, working distance, power supply and mounting space. Where a standard product does not fit the site structure, the housing and mounting can be customised.

What we confirm together

  • Camera triggering and inspection cadence——The flash rate and trigger method that continuous inspection requires.
  • Working distance——Distance from the light source to the target, and the area to illuminate.
  • Power supply——The AC or DC supply available on site.
  • Mounting space and site environment——Available space, temperature and protection requirements.
Ask about production-line integration

Start from the technology

Operating temperature, power supply and ingress protection differ between models; please check each item in the model tables.

Road inspection

Synchronised capture for road inspection equipment

For equipment such as road roughness inspection systems, we discuss the flash solution around the equipment’s capture cadence, camera mounting position and site environment, and adapt triggering and structure. Project parameters are determined by the equipment interface together with actual testing.

What we confirm together

  • Capture cadence——Capture rate while the equipment is moving, and how it synchronises with the camera.
  • Camera and light-source positions——How structure, beam and illuminated area are matched.
  • Power supply and site environment——The supply the equipment can provide, plus temperature and protection requirements.
Submit a road inspection requirement

Need to fit your equipment structure?

Housing, mounting holes, beam and interface can be customised; feasibility is confirmed by our engineering and sales teams.

About case studies

Published only with customer authorisation.

Projects involve our customers’ equipment and site information. We publish case studies only with customer authorisation, so this page describes application scenarios rather than customer names or results.

Discuss your inspection project

Share the equipment type, inspection scene, camera and trigger details, and we will suggest a suitable product route.

CallDiscuss Your Project